fits make: Chevy, Chevrolet. year: 2016–2019.

( Brand: Chevrolet ), ( Model: VOLT ), ( Part Type: Valve Cover Engine Cylinder Head ), ( Conditions Options: 4, 1.5, At, Fwd ), ( Genuine Oem: Yes ), ( Ipn: 350.gm1a18 ), ( Year: 2018 ), ( Manufacturer Warranty: 60 Day ), ( Partout Id: A-129865155 )
The **Chevrolet 350 GM1A18 engine cylinder head valve cover** is a precision-engineered component designed specifically for the **1.5L Ecotec turbocharged inline-four cylinder powertrain** found in models like the **Chevy Volt (2016 2019)**. This valve cover is crafted from high-quality **cast aluminum**, ensuring durability, lightweight performance, and resistance to corrosion, which is critical for the Volt s extended hybrid battery system and frequent regenerative braking cycles. The cover features a **sleek, aerodynamic design** with a **smooth, matte black finish**, blending seamlessly with the engine bay s modern aesthetic while providing a protective barrier against dirt, debris, and moisture. Its **tight-fitting gasket** (typically included or available separately) seals securely against the cylinder head, preventing oil leaks and maintaining optimal engine efficiency a key consideration for the Volt s **EcoFlex architecture**, which balances fuel economy and power delivery.
Underneath its polished exterior, the valve cover houses the **camshaft position sensor** and **valve cover breather system**, both of which play vital roles in the engine s performance and emissions compliance. The **breather system** helps regulate pressure within the valve cover, reducing oil consumption and ensuring smooth operation, particularly important for the **GM1A18 s turbocharged setup**, which operates under higher pressures than naturally aspirated engines. The cover is also designed to accommodate the **Volt s unique hybrid powertrain integration**, where the engine frequently operates in short bursts, requiring components that can withstand rapid thermal cycling without warping or degrading. Compatible with **2016 through 2019 Chevrolet Volt models**, this valve cover is a direct-fit replacement, ensuring compatibility with the **GM1A18 engine s specific valve cover mounting points, bolt patterns, and sensor placements**.
For maintenance and longevity, this valve cover is built to withstand the **Volt s extended service intervals** and hybrid-specific demands, including exposure to **electric motor cooling systems** and **regenerative braking heat cycles**. Its robust construction minimizes the risk of warping, even under the stress of turbocharged operation, while its **precise machining** ensures a snug fit that prevents oil leaks a common issue in high-mileage or modified hybrid vehicles. Whether replacing a worn or damaged cover, upgrading for aesthetic purposes, or addressing a leak, this **OEM-quality valve cover** delivers the reliability and performance expected from General Motors advanced powertrain components. Its inclusion of **correctly sized bolts and a compatible gasket** (when applicable) ensures a hassle-free installation, allowing for a clean, professional finish that aligns with the Volt s reputation for **efficiency, innovation, and durability**.
### **Pros and Cons of Buying a Chevrolet 350 GM1A18 (Chevrolet Volt Engine) Cylinder Head Valve Cover (1.5" Bolt Pattern, 2016 2019 Models)**
#### **Pros:**1. **Compatibility with Chevrolet Volt (2016 2019)** This valve cover is specifically designed for the **GM1A18 1.4L turbocharged engine** found in the **Chevrolet Volt** (2016 2019). It ensures a proper fit, preventing leaks and maintaining engine integrity.
2. **OEM Quality** If purchasing from a reputable supplier (e.g., GM parts dealer, authorized aftermarket supplier), the valve cover will meet the same standards as a factory replacement, ensuring durability and reliability.
3. **Prevents Oil Leaks** A worn or damaged valve cover can lead to oil leaks, which can damage electrical components (like the alternator or battery) and reduce engine performance. Replacing it ensures a tight seal.
4. **Improves Engine Aesthetics** A clean, properly installed valve cover enhances the engine bay s appearance, especially if you re working on a restoration or maintenance project.
5. **Easy Installation** The **1.5" bolt pattern** is standard for many small engines, making it straightforward to install with basic tools (socket wrench, gasket scraper, and new gasket).
6. **Cost-Effective Replacement** Compared to labor costs, buying and installing a new valve cover is relatively inexpensive, preventing more expensive engine damage from leaks.
7. **Prevents Contamination** A damaged valve cover can allow debris to enter the engine, leading to accelerated wear on internal components.
---
#### **Cons:**1. **Potential Counterfeit Parts** If buying from an untrusted seller (e.g., eBay, Amazon, or unknown online marketplaces), there s a risk of receiving **fake or substandard parts**. These may not fit properly, leak, or fail prematurely.
2. **Gasket Replacement Required** Every time you remove and reinstall the valve cover, the **old gasket must be replaced** to prevent leaks. Forgetting this step can lead to oil leaks and wasted money.
3. **Limited Availability Outside GM Network** While aftermarket suppliers carry this part, some may not stock it, requiring special ordering, which can delay repairs.
4. **Turbocharged Engine Considerations** The **GM1A18 is a turbocharged engine**, meaning it operates under higher pressures. If the valve cover isn t properly sealed, **oil can leak onto the turbocharger**, causing damage over time.
5. **Potential for Misalignment** If not installed correctly (e.g., bolts not torqued properly or gasket not aligned), the valve cover may leak or fail to seal effectively.
6. **Resale Value Impact (If Modifying)** If you re working on a **restored or modified Volt**, replacing the valve cover with an OEM part may not align with aesthetic preferences (e.g., aftermarket black or polished covers).
7. **Time-Consuming Installation** If you re not experienced with engine work, removing and reinstalling the valve cover may take several hours, especially if you need to clean the engine bay thoroughly afterward.
---
### **Conclusion:**Buying a **GM1A18 Chevrolet Volt cylinder head valve cover (1.5" bolt pattern, 2016 2019)** is a **necessary and cost-effective maintenance task** if your engine is leaking oil or the cover is damaged. The benefits **preventing leaks, protecting electrical components, and maintaining engine health** far outweigh the minor drawbacks, provided you **source the part from a trusted supplier** and **replace the gasket properly**.
The **biggest risks** come from **counterfeit parts or improper installation**, so always:- **Buy from an authorized GM parts dealer, reputable aftermarket supplier, or a trusted online retailer** (e.g., RockAuto, PartsGeek, or local auto parts stores).
- **Use a new gasket** every time you replace the cover.
- **Follow torque specifications** (typically **80 100 in-lbs** for the bolts).
- **Clean the mating surfaces** before installation to ensure a proper seal.
If you re unsure about installation, **consult a mechanic** to avoid costly mistakes.
---
### **Final Recommendation:****Purchase the valve cover from a trusted source** (preferably **OEM or high-quality aftermarket**) and **replace it as soon as leaks or damage are detected**. This is a **simple, preventative maintenance step** that extends the life of your **Chevrolet Volt s engine** and avoids more expensive repairs down the line.
If you re working on a **restoration or modification**, consider **aftermarket valve covers** (e.g., black, polished, or custom designs) for better aesthetics, but **ensure they are compatible** with the 1.5" bolt pattern and have proper sealing surfaces.
Stock Number - 2609. 4 ,1.5,AT,FWD. Donor Vehicle - 2018 VOLT. Warranty: All parts come with our standard 60 day warranty.
It is stored in doors and ready to be shipped.